Summer Starts Here - Save up to 70%
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
Secure your ball mount to your hitch with this rugged, innovative trailer hitch receiver lock. The lock's solid construction stands up to whatever the road and weather can dish out, and its swivel design makes locking and unlocking a snap.
Features:
Specs:
Note: Lock will not fit Draw-Tite and Reese brand Titan hitches with an 18,000-lb towing capacity. The washers that are used to reinforce the pin hole on these receivers make the width too long for the lock.
Average Customer Rating: 4.7 out of 5 stars (471 Customer Reviews)
Secure your ball mount to your hitch with this rugged, innovative trailer hitch receiver lock. The lock's solid construction stands up to whatever the road and weather can dish out, and its swivel design makes locking and unlocking a snap.
This item has held up very well. It’s all my truck probably 300 days out of the year and all sorts of weather. The only thing that happened is the dust cover retainer has broken, but I still have cap and use it. It’s never been a problem to unlock or lock and it has never been an issue while using it to hold my hitch. The red colour has also faded somewhat from the sun over the air but it’s not horrible. I would definitely recommend this product and would absolutely buy another one.
Installed on 2012 Ford F-250 with the OEM 2.5" hitch. Nice fit, also really like the stainless steel construction since most of my towing is done in the winter towing a trailer full of snowmobiles on typical midwestern heavily salted roads. Nice rubber boot around lock with weather cap prevents salt/water intrusion and abrasion on hitch surfaces. Good looking anodized red handle/stop on other end. As mentioned earlier, weather seal o-ring on stem is slightly oversized and tends to push out rather than engaging hole in lock but a little lube on the o-ring before installation mitigated that issue. Service from etrailer is top notch - bar none.
I have been using this with my Blue Ox hitch to pull my 11,000 GVW travel trailer for a year now and it works great and still looks close to new. No issues at all.
Great product, very pleased with it.
So far I have bought a hitch , hook, lock and on its way is also the wiring harness for my Tacoma. etrailer.com gets the parts to me quicker than expected. So far everything has fit perfectly. No need to look any farther than etrailer for your trailer needs.
Everything went nice and smooth outside shipping was fast as well
Works well, but, the lock side is a bit difficult. Need to shake it a bit while turning the key and holding the pin at the same time.
Good quality lock that works very good.
The item metal bar was scratched up a lot but it was functional. I'm not sure if that is how they are made at the factory. It had a good fit on my Tahoe with a 2" hitch. I'll see how happy I am with it after a year of usage.
Shipped very quickly! I was informed on the tracking and the day and time delivery was made. Excellent customer service. The hitch looks and fits great, seems well built. Love it!
Got tired of switching balls so ordered the B&W Tow and Stow. etrailer came through again. Exceptionally fast shipping and delivery and product was well packaged. Will be installing shortly. Also got the locking Master Lock hitch pin to keep the Tow and Stow on my truck instead of someone else's!!
Like that the key is pointing toward the rear of the vehicle, much easier to use.
Durable locks that work well and unlock easy when needed.
Earnest
5/25/2023
Still performing as expected. Quality product.
Great company to order from , the item came as described online . I have used this exact item in the past with great success
Nice stainless lock that should hold up to the weather.
Finally found a lock that fits my '08 Silverado HD, 2-1/2" receiver. Nice lock, very sturdy and fits great! Stainless won't rust like other locks out there.
Bob D.
5/2/2014
Unfortunately, the hard winter killed my lock. The protective cap fell off and the key slot got so packed full of road salt that the key wouldnt go in. I finally had to cut the lock off. Lesson learned: make sure you keep the plastic cap on!
John
1/2/2015
My lock suffered the same fate but my protective cap stayed on. The key would go in but not turn to unlock. Tried spraying penetrating oil in lock for days and a little heat did not help. Had to drill out lock. The Chicago winters and all the salt destroyed the aluminum lock.
Got a 2500 and needed a longer lock. This works great. Easy to unlock.
Perfect for securing my trailer hitch on new Toyota truck
Pamela R.
1/24/2019
Fit the new wider hitch system perfectly
great product the ball hitch is the best one i have ever owned.
Construction business, I own three diesel trucks and five trailers either 2" or 2&5/16.
this is the easiest fastest to change of all the balls i've owned.
Wish i would have bought one for each vehicle.
Purchased this hitch lock specifically because we were having trouble inserting our safety chains on receiver due to the length of our prior hitch lock. This lock gives us an added 0.5 inch, just what we needed. In addition I like the locking mechanism which has a rotation cam type lock vs the open cylinder with recessed ball bearings. I also appreciate this is stainless steel. I expect this lock to perform we for many years to come.
This lock is much easier to install than others, because the key slot faces you as you lock or unlock, as opposed to the key slot being in line with the pin making it difficult to see the key hole. I did note that the packaging states that the pin is rated at 10,000 lbs (towing load). For a locking pin long enough to fit Class V receivers (2 1/2" square), this is not an adequate rating. My system needs a rating of at least 14,000 lbs, so this pin is technically not sufficient. I am not going to worry about it, since the rating is not stamped on the pin and I know that the 5/8" pin will definitely be strong enough for my use. I do think that the issue should be addressed in the website description, however.
Despite what the product description says, this receiver lock does NOT work on a GMC 2500 with a 2 1/2" Receiver - the part is not long enough to engage the lock. On a positiove note, etrailer's customer service department has been great in allowing me to ship it back.
Patrick B.
11/27/2012
On 2011 and newer GMCChevy HD trucks, the lock is a bit too short. Instead, use RH5-XL.
R C.
6/23/2013
I have a 2013 GMC 2500HD with a 2 12 receiver and this product fits it perfect!
Solid construction.
I bought this lock, a draw tight hitch, a Curt wiring harness and a GMC LED light cover. The main reason I bought it was the information video about the hitch. It was a simple step by step video. Bought it for a very fair price and it installed just like they said. Arrived on time and was packed great. This is my site for future purchases. Rubber floor covering next on my list. Thanks for a great site to buy from.
Hefty. Works good with my 2 1/2" receiver set-up.
Larry
10/17/2020
Its been on my truck now for over a year and nobody has stolen my hitch! WooHoo!
Do you have a question about this Trailer Hitch Lock?
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Steven
4/4/2021
Havent lost my hitch yet so I guess the product works well! Thanks